PoliDisin™ AIR

PoliDisin™ AIR kit is a professional kit for air and surface dry disinfection, designed for infection prevention and control.

It is ideal for all frequently visited areas or areas more susceptible to infection. Airborne contamination is, in fact, pretty common and difficult to treat; covering the entire area is often hard, the devices that are located in some rooms can get wet and require strong and very toxic treatments, which make the treated areas inaccessible for several hours and sometimes do not guarantee a good biocidal result. PoliDisin™ AIR kit allows you to safely and thoroughly treat all surfaces and make the treated areas immediately accessible, being non-toxic. Thanks to the micronisation of very small micelles (0,5/1,5 microns), PoliDisin™ AIR treats the areas saturating the whole environment, without using water. The certification issued by the device at the end of each operation ensures high-level disinfection and the product correct application, as well as its traceability. The machine can be set manually or remotely programmed.

Active ingredient recommended by WHO, tested by the Atlanta CDC and approved by EPA. Meet EPA’s criteria for use against SARS CoV 2, the virus that causes COVID-19

 

MICRONIZATOR

CONSUMABLES

MIKRO AIR

MikroAIR™ micronizer, an innovative and very small (460mm X 600mm) medical device designed for air and surface disinfection through micronized applications and ozone. MikroAIR™ is equipped with a system for reading the bar-codes printed on the bottles containing the solution so as to control its use, as well as with other options to identify the rooms and operators in order to keep each single treatment under control. The device is also equipped with a printer to certify the applications and ensure their traceability, through a printout delivered on an annual basis.

The negatively charged micells bounce on the surfaces attracted from the positive charge of pathogens.

The room is accessible immediately after the treatment.

OZONE SOL™

OZONE SOL™ activator, used for reconstituting the disinfectant. This solution makes the aerosolized micelles more resistant, prolonging their air suspension and increasing their negative charge to facilitate pathogen attraction.

POLIDISIN™

PoliDisin™ non-toxic disinfectant with potassium peroxymonosulfate and povidone-iodine; an innovative and convenient non-toxic and biodegradable product with virucidal, bactericidal, sporicidal, fungicidal and mycobacterial properties.

The effectiveness of the disinfectant is demonstrated with more than 200 laboratory tests on the active principle which shows mycobactericidal, sporicidal, bactericidal (EN 1276 EN 13697 fungicidal (EN 1650 EN 13697 and virucidal (EN 14476 activities as well as to the most recent bactericidal efficacy tests according to EN 13727 fungicide according to EN 13624 and EN 1275 and sporicidal according to EN 13704)

Effectiveness proved on the active ingredient by succeding in over 1000 efficacy tests

APPLICATIONS

  • Health care sector

    Hospitals and polyclinics, Ambulances, Obstetrics clinics, Dental clinics, Scientific and clinical labs, etc.

  • Community services

    Schools, kindergartens and primary schools, Hospices, recreation centres, hotels, spa, theatres, cinemas, gyms, offices, etc.

  • Food processing

    Canteens, catering services, supermarkets and groceries, salami manufacturing companies, diaries, butchers.

  • Transportations

    Military, merchant and cruise ships, Ferry boats, fishing boats, Military and civil planes, Merchant and passenger trains, Containers, Road haulage etc.

  • Industrial sector

    Drug companies, air duct treatments, cleaning, etc.

Polydisinfection exclusive Distributor